19" two post high-load open frames RSG2
RSG2 high-load two post open frames are designed to be used together with VMF High Density Wire Managers. RSG2 open frames bring unbeatable accessibility. The RSG2 two post frames are available with two load ratings, depending on the type of equipment that you want to install. The 500kg rated frame is ideally suited to high density cabling applications, whereas the 1000kg rated frame is suited to the installation of heavier equipment. The frames are also suitable for use in testing and service rooms where they ensure unlimited access to components installed.Height: 27, 42, 45, 47U
Width: 550mm
Depth: 100mm
Load rating: 500kg (balanced load; all heights, 1000kg (balanced load; only 42, 45, 47U)
IP rating: IP00 (no protection)
Color: RAL 9005
Unbeatable accessibility
Open frames provide you with an unbeatable accessibility in comparison with standard 19" data racks, however the downside is no IP rating, so we recommend that the frames be located in a secure, dust free environment.
Load rating
RSG2 series two post open frames are produced in two versions with load rating 500kg and 1000kg. 500kg version is suitable for passive equipment installation while in the 1000kg (balanced load) open frames can be used to house heavy active equipment.
Compatibility with HDWM portfolio
Two post open frames are designed to be used together with High Density Wire Managers ensuring maximum compatibility between RSG2 and HDWM product range - more about HDWM
Standard equipment
1 pair of 19" vertical extrusions with U marking, 2x top angles, 2x base
| Where to buy/Delivery terms The frame can be purchased through our distribution network - you can find the nearest distributor via the contact locator that is a part of this page. The frame is delivered unassembled - it has to be assembled at the installation site.
|
