19" IT Rack with Small Cooling Units
CoolSeven and CoolSpot units are designed to remove low and medium heat loads in individual racks. The products represent a family of precision cooling at the IT rack level of the PREMIUM and OPTIMAL series. We can offer two different cooling principles - the Chilled Water (CW) version for connection to the building cold water piping system, and the Direct Expansion (DX) version with complete compressor circle inside. Especially, CoolSeven cooling units bring economic and financial savings.
| Parameters of cooling units | CoolSeven with CoolOut Outdoor Condensing Unit | CoolSpot |
|---|---|---|
| Cooling capacity | DX: 0.8 kW – 7 kW |
DX: from 0.32 kW up to 5.2 kW CW: from 2.2 kW up to 6.7 kW |
| Minimum Cooling Capacity |
✔ From 11 % (Hot Gas Bypass: lower tendencies to cycle) ✔ Automatic control of EC ventilators (Controlled from 20% of max. speed) ✔ Cold and hot zone separation using an air separation frame and blank panels |
from 30 % (Frequent short cycles of compressor) Standard AC ventilators (Without speed control) Cooled the entire volume of the rack |
| Capacity regulation |
✔ Continous cool air regulation (inverter compressor control) ✔ Fan speed control |
Possibility to regulate the temperature on the display of the air conditioning unit |
| Remote unit monitoring |
YES |
NO |
| Mounting |
Inside the IT rack on the rails (7U) |
Mounted either onto the top housing of the rack or onto the side panel of the rack |
| Suitable for |
In closed and open rooms ✔ Heat is dissipated by piping out of the room Optimal for small server rooms and office building |
In a ventilated room with forced ventilation Heat dissipated into the room* Optimal for production plants |
* DX solution. CW solution - the heat is dissipated through a pipe to the chiller.
Have questions or looking for advice? Contact us.
Book a remote initial consultation for your project. Propose a date, and we will send you a Microsoft Teams meeting invitation by e-mail.
Middle East
Ehab Mohamed Azab
Regional Sales Director
Tel.: +966 540 002 341
E-mail: ehab.azab@conteg.com
DACH, BALTIC states, NORDIC countries, Poland, Hungary
Radovan Doležal
Regional Sales Director
Tel.: +420 724 723 184
E-mail: radovan.dolezal@conteg.com
Eastern Europe
Walter Grossmann
Regional Sales Director
Tel.: +49 172 848 4346
E-mail: walter.grossmann@conteg.com
France, Maghreb
Jean-Pierre Strub
Regional Sales Director
Tel.: +33 686 074 386
E-mail: jeanpierre.strub@conteg.com
Russia, CIS
Anatolii Butenko
Regional Sales Director
Tel.: +7 495 506 13 28
E-mail: anatolii.butenko@conteg.com
Czech Republic, Slovak Republic
Lubomír Vlasák
Regional Sales Director
Tel.: +420 724 371 550
E-mail: lubomir.vlasak@conteg.cz
List of All Our Branches and Sales Representations
The majority of the countries in Europe, the Middle East, Africa, and Asia are covered by our sales representatives and Conteg partners. If your country is not listed please contact our headquarters.