Accessories
We offer a wide range of accessories for Outdoor Applications.

Lighting Unit
The lighting unit with a motion sensor provides light is equipped with a magnet and can therefore be easily placed anywhere in the cabinet.
Show
Daisy-chain Temperature Sensor
Daisy-chain temperature sensor with a 1.5 m long cable. Up to 8 sensors can by connected in the daisy-chain to a single intelligent port.
Show
Expander for Intelligent Port
The expander is used for expanding an intelligent port up to 8 dry contacts (input/output).
Show
Air-flow sensor
The air-flow sensor is a device that checks airflow in areas where consistent airflow is necessary.
Show
Siren & strobe light
The Siren & Strobe sensor is a combination sensor that emits a loud piercing sound and a visual blinking strobe light. It is an important addition to security and safety.
Show
Dry contact
The dry contact is used to connect external devices, such as security or fire systems, or any application that requires control by the unit.
Show
Magnetic door contact
Magnetic door contact is a security feature for door or side panel status monitoring.
Show
AC-Sensor controlled relay—normally open (110V/220V)
The AC-Sensor controlled relay is the controlling power for external devices.
Show
Rope Water Locate Sensor
The rope water locating sensor is designed for specific location water detection.
Show
Temperature and Humidity Sensor
The encased temperature and humidity sensor is designed for placement into racks and measures temperature and humidity.
Show
PIR motion detector
Motion detector with 60° detection angle and 3 m detection distance; used for securing rooms or buildings and sending alerts.
Show
Wire Temperature sensor for Mini
Wire Temperature sensor the RMS‑ST‑02 1-Wire Temperature sensor comes with a 3 m long cable with an RJ12 connector.
Show
Wire Humidity sensor
Wire Humidity sensor the RMS‑SH‑02 1‑Wire Humidity sensor comes with a 3 m long cable with an RJ12 connector.
Show
One wire temperature and humidity sensors
RMS‑STH‑02, wire temperature and humidity sensors, rack mounting kit, a 3 m long cable, 2x RJ12 connector.
Show
1‑Wire Temperature OUTDOOR sensor
1-Wire temperature outdoor sensors with an RJ12 connector and 3 m long cable.
Show
PowerBox, remote switching external devices
RMS‑PWR‑01 PowerBox, enables remote switching of external devices up to 230V/10A and has a power detection feature.
Show
Universal power adapter 5V DC
Universal power adapter 5 V DC RMS‑PW‑05 universal power adapter.
Show
Hub for connecting of 2 sensors
Hub for connecting 2 sensors RMS‑CON‑04 Hub for connecting 2 sensors to the 1‑Wire bus.
Show
Rails for interior installation
Vertical perforated mounting rails for comfort installation of components.
Show
Baying kit - WME
Suitable for assembling the WME enclosures in a row while maintaining IP protection.
Show
19“, 21“ and ETSI vertical rails
Vertical rails are for mounting 19” (21”) electronic components or ETSI telecomm equipment inside the outTEG cabinet.
Show
19" fixed extrusions for inTEG WME and OMR LITE
Inner 19” fixed extrusions for installation of IT/Telco componets.
Show
Horizontal and vertical rails for outdoor cabinets
The horizontal rails are used for situations that require the mounting of heavy electronic equipment, or can also be used to create additional horizontal or vertical mounting planes.
Show
Fixing frame for cast concrete base
A welded frame designed for embedding into the concrete plinth.
Show
Perforated roof
The perforated roof is used for better ventilation within the outeTEG OMR outdoor cabinet.
Show
Perforated outTEG roof with top filter fan
Complete set of perforated roof and filter fan—top version.
Show
Side panels outTEG OMR—plain or ready for AC units installation
For an outdoor cabinet OMR without the climate solution
Show
Side panels outTEG OMR—with forced ventilation
Double-walled constructed side panels with a filter fan and an outlet grid for assembling with cabinets OMR-DN-xxxxxx-R
Show
Side panels outTEG OMR—with AC unit
Suitable for outTEG OMR outdoor cabinet, consisting of external and internal parts, ready for modifications.
Show
Door switch for outdoor cabinets
The switch is used to switch on/off of the installed components such as lights, fans, cooling units
Show
Thermostat for cooling and heating
Bi-metal thermostats for regulating heating and cooling inside the enclosure.
Show
Pressure Compensator
This device controls inside pressure during changes of outside temperatures.
Show
Drainage device
The device allows to remove the condensate from the enclosure, in applications with high oscillation of ambient temperatures.
Show