Dual Contactless Multi-format Reader

Dual Contactless Multi-format Reader

The Dual Contactless Multi-format reader is suitable for mounting on racks, wall, alley or other outdoor or indoor location (IP 55). Easy connection to the Rack Door Unit (RMS-ACS-U-RDU) via attached cable with colored RJ-45 connector.

The reader is equipped with a pair of reading technologies, 125 kHz (e.g. EM Marine) and 13,56 MHz (e.g. MIFARE® or NFC).

Next to classic RFID cards or tags, the reader is compatible with mobile phones equipped with NFC technology and minimum OS Android® 4.4 Kit Kat (or higher) using appropriate application. The mobile phone can be used for identification instead of classic cards (card emulation mode).

The readers are supplied in a black glossy box with front surface is made of tempered glass.

Code: RMS-ACS-U-MCR


Where to buy
Print Favorities E-mail Twitter RSS
  • RMS-ACS-U-MCR_BK_conteg.jpgRMS-ACS-U-MCR-black_conteg.jpg
  • Can read EM & HID prox. (125 kHz) and MIFARE® (13,56 MHz) cards/tags
  • Support Mobile Phone with NFC (OS android 4.4 or higher; Mobile application required )
  • Reading distance to 4 cm
  • Communicate via Wiegand
  • Equipped with a buzzer and LED light to indicate status
  • Indoor/Outdoor use
  • Low power consumption (typically 65 mA, maximum 180 mA)
  • Powered from RDU (12 V DC)
  • Mounting is with 2 screws
  • Cable: 4.5 m long with green boot on connector RJ-45 for right connection assembling
  • Operating temperature: -25 °C – +70 °C
  • Operating humidity: 5 ÷ 95 % RH, non-condensing
  • Gorilla glass 2320 on front panel
  • IP rating: IP55, IK07
  • Size: 96x67x13,5 mm (HxWxD)
  • Weight: 0.18 kg
File type Language version

  • Datasheet RAMOS ACS - Access Control System (PDF - 2.66MB)
    cs  de  en  fr  ru   

Datasheet:

data_sheet_RHF