Electronic Handle with Card Reader

Electronic Handle with Card Reader

The electronic handle with card reader is designed for mounting directly onto a rack door withstandard 25 × 150 mm mounting hole.

The handle with half-cylindrical insert can be openedusing a key and can be mounted onto a door with a multi-point or single-point locking mechanism.

The body is fi tted with LED indication of status—unlocked, locked, open and breach.

The built-inminiature reader is located in the upper portion of the handle body and has a maximum readingdistance of 3 cm. It is capable of reading EM and HID Prox 125 kHz cards and communicates viathe Wiegand 26b protocol.

The handle is highly energy effi cient, requiring less than 50 mA whenidle, and less than 250 mA when in working mode, and is powered from the main unit.

 

ode: DP-ZM-E2

Where to buy
Print Favorities E-mail Twitter RSS
  • DP-ZM-E2DP-ZM-E2-
  • Industry standard 25x150 mm panel prep
  • Can be fitted with a multi-point lock or single-point locking rod

Latch:

  • Latch has a LED light which indicates the status of the handle
  • Shows the status of the lock (closed, opened, held open and forced open)
  • Latch consumes very low power (in standby mode less than 50 mA and in operational mode less than 200 mA)
  • Powered from RDU (12 V DC)
  • Latch can be opened with key
  • Cable: 4.5 m long with red boot on connector RJ-45 for right connection assembling

Card reader:

  • Can read EM & HID prox. 125 kHz cards
  • Consumes very low power (typically less than 80 mA)
  • Powered from RDU (12 V DC)
  • Communicates via Wiegand 26b protocol
  • Reading distance from 3 cm

Cable: 4.5 m long with green boot on connector RJ-45 for right connection assembling

 

File type Language version

  • Datasheet RAMOS ACS - Access Control System (PDF - 2.66MB)
    cs  de  en  fr  ru   

Datasheet:

data_sheet_RHF