FSM-X Enclosures—stainless steel, integrated side panels

FSM-X free-standing enclosures are made of stainless steel with side panels integrated in the frame.

Datasheet

FSM-X enclosures are suitable for indoor and outdoor use and will withstand even the most demanding industrial environments, with an emphasis on a high level of cleanness and resistance to the surrounding environment. The welded construction of the enclosure is made of profiled side panels joined together by crossbar profiles. This manufacturing method can meet the highest requirements for rigidity and lends the cabinet 700 kg of load-bearing capacity.

Thanks to the design of the bottom frame, FSM-X can be used even without an extra plinth. To create a variety of mounting surfaces and planes, we offer a wide range of system accessories designed for optimal use of the frame profile. We also supply components to control the environment inside the enclosure, such as heating units, filtered fans, or active cooling units.

MAIN ADVANTAGES:

Welded compact construction with integrated side panels—stainless steel
Load capacity 700 kg
Single-door enclosure designs
Can be installed without an additional supporting plinth
Designer lift-up handle—the standard for all enclosure types
Easy to close doors thanks to a special locking system
Maximum use of interior space—possibility of placing the mounting plate between the rear posts
Side panels integrated into the frame
17 sizes from 1 400 × 600 × 300 mm
up to 2 000 × 1 000 × 400 mm
Wide assortment of accessories
Wide assortment of tailor-made customer solutions—cut-outs according to your requirements before and after final surface finishing accessories

Parameter	Value
Material	Enclosure: stainless steel 1.4301 (AISI 304), on request stainless steel 1.4404 (AISI 316L) Mounting plate: zinc-plated sheet steel
Enclosure surface finish	Fine ground surface
Application	Indoors and outdoors
IP rating	IP55 according to the EN 60529 norm (the degree of protection can be reduced after mounting some accessories)
Mechanical durability	IK10 according to IEC 6226
Supply includes	Welded construction with integrated side panels Full single-door with swing handle is equipped with a four-point locking system The door hinges are located on the right-hand side of the single door enclosure (option to switch the door mounting from right to left is available) Rear and top panel Gland plate Mounting plate with raster