Cooling & Ventilation—IT and Telco | CONTEG

Cooling & Ventilation

Individual cooling units from the Targeted Cooling portfolio are an integral part of our comprehensive data center solution. Our product range includes in-row, above-rack, in-rack and room cooling units for IT as well as all types of individual cooling units for industrial and outdoor solutions: roof-, wall- and side-mounted. We can also offer you ventilation units and other airflow routing products, the use of which is a prerequisite for efficient cooling of installed technology.

CoolTeg Plus DF

CoolTeg Plus DF is an in-row air-conditioning unit based on an innovative principle of dual-fluid cooling that combines water-based and direct expansion cooling.

Show
Ecological refrigerant

CoolTeg Plus DX

The CoolTeg Plus DX indoor unit with a Mitsubishi outdoor compressor unit is a highly effective system especially suitable for server rooms up to 100kW. The new generation is equipped with EC fans and touch.

Show
System with direct expansion

CoolTop DX

Direct expansion (DX) precision cooling units with advanced performance control for installation on top of IT racks

Show
Free-cooling system

CoolTeg Plus CW

CoolTeg CW units are suitable for cooling systems with a chilled water source. They can be used with free-cooling systems. The new generation is equipped with EC fans and touch display.

Show
Chilled water system

CoolTop CW

Above-rack cooling unit designed to be connected to any type of chilled water. Uniquely suitable for effective targeted cooling of server rooms and large data centers.

Show
Width of only 30 cm

CoolTeg Plus XC

CoolTeg Plus XC in-row units are based on the direct expansion principal. A compressor is integrated into the indoor unit, which is connected to its outdoor condenser.

Show

CoolSeven

7U tall indoor unit integrated into 19" racks and utilizing a split cooling system composed of two components—an indoor and an outdoor unit.

Show

CoolSpot CW TW

Small air-conditioning unit in Top Mount design for perfect air separation and space saving in IT room.

Show

CoolSpot CW WW

Small air-conditioning unit in Wall Mount design for double power or better safety thanks to the standby unit.

Show

CoolSpot DX TM

CoolSpot DX TM units are mounted to the rack top cover. This solution is designed for low, medium, and high thermal loads, thanks to its cooling output which can reach as much as 6 kW.

Show

CoolSpot DX WM

CoolSpot DX WM cooling units are installed on the sides of racks, replacing one side panel. These wall-mount cooling units are particularly useful when there is limited ceiling clearance, making it impossible to install top-mounted solutions.

Show
New design

CoolRAC XC

Based on the direct expansion principle. A compressor is integrated into the indoor unit, which is connected to its outdoor condenser.

Show
New design

CoolRAC CW

Water cooled room cooling unit is designed to be connected to any system with a cold water source.

Show
New design

CoolRAC DF

Combine the advantages of CW and XC systems—optimal minimum operating costs.

Show

CoolOut Condensing Unit

The CoolOut outdoor condensing unit is specially designed for conducting heat out of data centers. The unit meets all the strict demands on precision, stability and service life required for data centers

Show

Ventilation Units with AC Fans

Ventilation units and fans are used for cooling low heat-dissipating equipment installed in a rack. For medium and high thermal loads, we recommend air-conditioning units from our Targeted Cooling portfolio.

Show
Very low power consumption

High-end EC Fans

Fans are used for cooling low heat-dissipating equipment installed in a rack. For medium and high thermal loads, we recommend air-conditioning units from our Targeted Cooling portfolio.

Show

LITE Ventilation Unit

Ventilation units are used for cooling low heat-dissipating equipment installed in a rack. For medium and high thermal loads, we recommend air-conditioning units from our Targeted Cooling portfolio.

Show

19" Blank Panels for Empty Rack Unit Positions

These panels are mounted on 19" vertical extrusions. The blank panels are used for blanking off the empty positions in a rack.

Show

Air Separation Frame

Airflow passive control elements help to optimize cooling efficiency by minimizing bypass airflow. Between the columns and the extrusions within the rack.

Show

Airflow Deflector

Airflow passive control elements help to optimize cooling efficiency by minimizing bypass airflow. Between the columns and the extrusions within the rack.

Show

Chimney

Airflow passive control elements help to optimize cooling efficiency by minimizing bypass airflow. Between the columns and the extrusions within the rack.

Show

19" Vented panel with brush

The vented panels enable front to rear cable passage through empty positions in the rack while helping to minimize by-pass airflow.

Show