CoolTeg Plus DF
In-row cooling unit based on an innovative principle of dual-fluid cooling that combines water-based and direct expansion cooling.
CoolTeg Plus DF is an in-row air-conditioning unit based on an innovative principle of dual-fluid cooling that combines water-based and direct expansion cooling. The unit contains a unique and highly efficient heat exchanger that enables the use of free cooling. The most important functional elements of the system are integrated in the indoor unit. Heat is conducted out of the data center by a hydraulic circuit. This circuit is connected to two branches inside the unit—to a water/air heat exchanger and to a water-cooled condenser. The water/air heat exchanger is used primarily during winter, when outdoor temperatures are low, while the water-cooled condenser is used mainly in summer months when the direct expansion circuit needs to be active. The unit can run in three different modes—free cooling mode, direct expansion (evaporative), and mixed (hybrid) mode, where both branches of the unit, water cooling, and direct expansion, work in tandem.
CoolTeg Plus DF40—this unique cooling unit, with a width of only 40 cm and a maximum cooling capacity of up to 24.5 kW, can be connected to a hydraulic circuit (water-glycol) containing a pump and an outdoor dry cooler. The design offers a wide range of possibilities in terms of the arrangement, ways to save on purchasing expenses, or increase the redundancy of a data center's cooling system: you can use just a single or multiple cooling units connected to the same hydraulic circuit, you can connect one group of units to one hydraulic circuit and another to a second circuit, or you can connect all the units (or groups of units) together to any number of hydraulic circuits as you choose.
Compared to purely water-cooled systems (CW units) using chillers, the CoolTeg Plus DF system offers major advantages in terms of redundancy at the level of the indoor unit.
Compared to direct expansion cooling systems, CoolTeg Plus DF has the benefit of enabling free cooling and allowing significant savings on operating costs in the winter months (particularly valuable due to ever-increasing energy prices).
Thanks to an exceptional range of options in the connection of units and hydraulic circuits, the CoolTeg Plus DF unit is suitable for data centers of all sizes.
- Integrated free cooling
- The most efficient dual-fluid heat exchanger in its category
- Low operating costs and redundancy within one system
|CoolTeg Plus DF40||
Free cooling integrated in the indoor unit
The most efficient two-fluid heat exchanger in its class
Unmatched energy efficiency and low operating costs
Use of pure direct expansion cooling mode only 14 % of the year
Variable design and size of indoor and outdoor unit
High variability of the entire system
Environmentally-friendly thanks to very low coolant fill
All main functional parts integrated in a unit only 40 cm wide
Highly efficient BLDC compressor located inside the unit
Low-pressure and high-pressure safety switches
Easy expandability of the system after integration
Wide range of outdoor temperatures
|Outdoor Unit||The indoor CoolTeg Plus DF40 unit is compatible with any dry cooler with a variable air flow rate. The outdoor unit should be designed based on the intended temperature of the glycol-water mixture and the typical maximum ambient temperature. To make sure your outdoor unit has the proper design, use the CoolTool selection software or contact our team of experts.|
File size: 193 kB
File size: 277 kB
File size: 158 kB
File size: 158 kB
File size: 171 kB
File size: 171 kB
File size: 305 kB
File size: 144 kB
Brochure—Cooling Units For IT
File size: 4906 kB
Brochure- Complete Solutions for Datacenter
File size: 1379 kB