FSM-O—Compact, Stainless Steel | CONTEG

FSM-O Enclosures - stainless steel, integrated side panels

FSM-O free-standing outdoor enclosures are made of stainless steel.

FSM-O free-standing outdoor cabinets are made of stainless steel. FSM-O cabinets have integrated side panels in the frame and a surface finish resistant to UV radiation, which protects against harmful environmental influences.

The welded construction of the cabinet is made of profiled side panels joined together by crossbar profiles. This manufacturing method can meet the highest requirements for rigidity and lends the cabinet 700 kg of load-bearing capacity. Thanks to the design of the bottom frame, FSM-O can be used even without an extra plinth.

To create a variety of mounting surfaces and planes, we offer a wide range of system accessories designed for optimal use of the frame profile.

We also supply components to control the environment inside the cabinet, such as heating units, filtered fans or active cooling units.


  • Welded  construction with integrated side panels—surface finish stainless steel with outdoor polyester powder coating
  • Load capacity 700 kg
  • Single-door cabinet designs
  • Can be installed without an additional supporting plinth
  • Designer lift-up handle—the standard for all cabinet types
  • Easy to close doors thanks to a special locking system
  • Maximum use of interior space—possibility of placing the mounting plate between the rear posts
  • Side panels integrated in the frame
  • 17 sizes from 1 400 × 600 × 300 mm up to 2 000 × 1 000 × 400 mm
  • Wide assortment of accessories
  • Wide assortment of tailor-made customer solutions; cut-outs according to your requirements before and after final surface finishing accessories

Parameter Value
Enclosure material Sheet steel
Mounting plate material Zinc-plated sheet steel
Enclosure surface finish Epoxy polyester-powder coat
Color RAL7035 for indoor use
Protection degree IP55 according to the EN 60529 norm (the degree of protection can be reduced after mounting some accessories)
Mechanical protection IK10 according to IEC 62262
Supply includes

Welded construction with integrated side panels

Full single-door with swing handle is equipped with a four-point locking system

The door hinges are located on the right-hand side of the singledoor enclosure (option to switch the door mounting from right to left is available)

Rear and top panel

Gland plate

Mounting plate with raster



File size: 1662 kB

Other versions ru CZ fr


File size: 54 kB



File size: 168 kB



File size: 66 kB


Product catalog - Industrial Cabinets

File size: 8341 kB


Product catalog - Outdoor Cabinets

File size: 11014 kB

Other versions CZ

Industrial cabinets

File size: 1037 kB



100 mm and 200 mm height plinths allow to place the enclosure on firm base


Sealing set IP55

Special ionomer tape 100% waterproof


Spare mounting plate—full

Spare zinc-plated mounting plate with labeled raster.


Side Brackets For Mounting Plates

The brackets are used for additional mounting plate fixation and vibration reduction into FSM and FSE cabinets.


Horizontal and vertical rails

Perforated mounting rails to create additional mounting positions


Horizontal rails

Rails for mounting high-load accessories


Door-mounting rails

Door rails for installation of components


Profile for cable fixing

Profile rail C for universal or recessed mounting position


19" Vertical Extrusions

Extrusions for fixing of 19" accessories


19" Brackets

Brackets for 19" extrusions for 600 mm or 800 mm wide free-standing enclosures.


19" Swing frame

To create a tilting 19” plane and access to the rear of the 800 mm wide cabinet


Door stop

Fixing the door in open position


Door switch

The switch is used to automatically switch on/off of the installed components such as lights, fans, cooling units.


Utility Lectern

Utility lectern is suitable for the FSM and FSE enclosures


Partial Mounting Plate

The plate is used to create additional front and side mounting planes.


Locks and Lock Inserts for FSE/FSM

Spare inserts instead of the standard 5 mm double-bar in the FSE and FSM enclosures.



Cage nuts, screws, hinge, pull-out brackes, fasteners.


LED Light

Complete lighting units with rocker switch and inter-connection cables light up the interior of the FSE/FSM cabinet, option of connecting several light fixtures.


Pocket for documents

Self-adhesive plastic pocket for placing A4 documentation inside the enclosure.


Filter Fans

Forced ventilation fans maintain the correct temperature inside the cabinet by exchanging heated inside air for cool outside air.