CoolD2C S
Product introduction
CoolSeven is a type of direct vaporization unit for precision cooling inside cabinets. CoolSeven is a 7U high indoor unit installed on rails inside in a 19' cabinet and is based on a split cooling system, which consists of two parts - an indoor unit and an outdoor unit.Key benefits of the product
- Precise control of cooling performance based on actual air temperature
- Compatible with all 19"" IT cabinets
- Individual control of cooling at the cabinet level
- Very low energy consumption thanks to EC fans
- Heat is removed directly from the cabinet to the outdoor environment
- An outdoor unit version for very low outside temperatures available
- Filterless operation
- Wide range of accessories
- Ready for communication with a monitoring system (e.g. CONTEG Pro Server)
- Emergency door opening function when the emergency temperature is exceeded. Compatible with CONTEG EOS emergency opening system.
Information
Key features
| Product line name |
CoolSeven |
|---|---|
| Height (U) |
7
|
| Power |
AC-ODX-07-xxxxx |
| Height (mm) |
311 (installation in 7U)
|
| Weight (kg) |
without filter |
| Width (mm) |
482.6 mm (installation in 19")
|
| Depth (mm) |
624
|
| Application |
Open/Closed |
| Input power |
The CoolSeven unit is based on the direct evaporation principle with the refrigerant circulating between one indoor unit and one outdoor unit. The outdoor compressor unit is equipped with an inverter-controlled BLDC compressor that enables automatic regulation of the cooling power (up to 8 kW maximum). Thanks to the separation of the indoor and outdoor units, there is no need for additional room ventilation. The CoolSeven unit is designed for direct installation in 19"" cabinets, where it occupies the height of seven rack units (7U). In addition to the refrigerant piping, power and communication lines, the unit must also be connected to the condensate drain. The highly efficient evaporator of the internal cooling unit is treated with a special hydrophilic coating that minimizes the risk of condensate escaping, while the fans are extremely power-efficient thanks to EC technology. Air flow and cooling performance are automatically controlled thanks to a built-in controller with special CONTEG software. The unit is equipped with a compact LCD display for setting and checking cooling parameters. For communication with BMS systems, the unit is equipped with an integrated MODBus RTU interface. Optionally, the unit can be equipped with a network card (SNMP, WEB server, Logger, E-mail, FTP PUSH, MODBus TCP/IP, BACnet...). The CoolSeven unit is extremely user-friendly and simple to set up while also offering more complex advanced functions. The first start-up and subsequent operation of the unit is therefore very easy and efficient. |
| Water flow |
2.7 A |
| Maximum current |
8.1 kW |
| Power regulation |
230 V, 1 ph, 50-60 Hz |
| Nominal net cooling capacity |
Office space Data cabinets or halls with a closed architecture Cabinets with no or insufficient cooling Dusty environment |
| Architecture |
AC-C7-DX-xxxxxxx |
| Operating current (values at steady 80% power output) |
11–100 % |
| Fan drive technology |
Direct evaporation |
| Nominal power consumption (values at steady 80% power output) |
7.5 kW |
| Maximum air flow |
2.6 A |
| Number of fans |
613 W |
| Refrigerant type |
1791 m3/h |
| Filter class |
2 pcs |
| Sound pressure Lw(A) |
R410A |
| Input pipe diameter and type |
30-52 dB |
| Water connection |
12 mm |
| Output pipe diameter and type |
29.8 kg |
| Water pressure loss |
16 mm |