Data centers
Implementation of a micro data center in the heart of Andalusia
A modern company praised our solution based on RF1 rack cabinets.
Solutions
19" IT cabinets with small air conditioning units
Small CoolSpot and CoolSeven air conditioning units are designed for low and medium heat loads and represent a group of precision cooling units within the PREMIUM and OPTIMAL series.
We offer two different types of units: with water cooling (CW) for connection to the cold water system in the building, and with direct evaporation (DX). CoolSeven cooling units are particularly cost- and power-efficient.
| Cooling unit parameters | CoolSeven with CoolOut | CoolSpot |
|---|---|---|
| Cooling performance | DX: 0.8 kW - 7 kW |
DX: from 0.32 kW to 5.2 kW CW: from 2.2 kW to 6.7 kW |
| Minimum cooling capacity |
✔ From 11% (Hot Gas Bypass: lower cycling tendency) ✔ EC fans (controlled from 20% of max. speed) ✔ Separation of cold and hot zone by separation frame and plugs |
from 30% (frequent short compressor cycles) Standard AC fans (without speed control) Cools the entire space of the cabinet. |
| Power control |
✔ Smooth air control (inverter-based compressor control) ✔ Fan speed control |
Temperature control on the air conditioning unit’s display |
| Remote unit monitoring |
YES |
NO |
| Unit placement |
Inside the cabinet on rails (7U) |
Outside on the roof or on the side of the switchboard |
| Recommended placement |
For closed and open rooms ✔ Heat dissipated through the pipe to the outside of the room Ideal for smaller server rooms and office buildings |
For a ventilated room with forced air flow Heat dissipates into the room* Ideal for production halls |
* for a DX solution. In a CW solution, the heat is dissipated through a pipe to the chiller.
Just tell us what you need. Wherever possible, we will be at your service.
We are the only data center supplier with whom you can easily agree on very specific conditions.
Our products will help you reduce your energy consumption and carbon footprint.
Where you can find us
We have sales offices with showrooms and sales partners in 70+ countries on 3 continents.However, we manufacture all our technologies in the Czech Republic. This gives us hands-on control over the quality of our products.
More than 26 years on the market
CONTEG is a Czech family business founded by Jan, Vít and Vojtěch Voláček in 1998.Today, we have more than 500 employees at eight companies within the CONTEG Group.
Solutions
We will provide a comprehensive range of technologies for your data centerKey technologies will be preassembled at CONTEG’s production plant. This allows us to test their functionality and compatibility in advance and significantly reduce the construction time on site.
Reference
Naše řešení datových center najdete u světových i menších firemPodívejte se, co o nás říkají klienti, pro které jsme stavěli datová centra.
Data centers
Container terminal in the Suez Canal
We delivered a rugged solution able to withstand the harsh conditions of the world-famous canal.
Outdoor applications
Outdoor cabinets for an ambitious project in Mecca
The Masar Project is a major undertaking in the heart of Mecca in Saudi Arabia.
Data centers
We built a complete data center at the Alkmaar hospital
CONTEG equipped ten data rooms at Noordwest Hospital in Alkmaar, the Netherlands
Data centers
We built the Rondel data center up to the roof
We built the Rondel regional data center in Ústí nad Labem, Czech Republic.
Our clients
CONTEG technologies can be found in data centers run by world-class brands and elsewhere.
CONTEG also supplies mobile data centers for the full range of ICT performance requirements. We will install the complete mobile data center infrastructure in a steel container that can be moved anywhere.
Do you need help with the selection?
Contact us!
Contact the Sales Department or fill in the form and we will get back to you as soon as possible.
