19" Stainless Steel Enclosures | CONTEG

19" Stainless Steel Enclosures

The WME-O19 and WME-X19 stainless steel compact enclosures are high-quality single-door stainless steel 19" enclosures for indoor and outdoor use, with an emphasis on high resistance to the environment and versatility of use.

WME-O19

The WME-O19 series is designed primarily for outdoor use. It is made of stainless steel with a surface finish resistant to UV radiation. A roof can be supplied with the WME-O19 enclosure.

Datasheet download

WME-X19

The WME-X19 series is designed for indoor and outdoor use. It is made of stainless steel type AISI 304, which is extremely resistant to corrosion. WME-X19 is on request also available in stainless steel type AISI 316L (even more resistant—e.g. salt water, very aggressive chemicals etc.).

Datasheet download

SUITABLE FOR

The structural design of these series offers high rigidity of the entire enclosure and the back panel. Manufacturing by laser welding technology lends the enclosures a clean design. The standard supply of this cabinet includes 19" extrusions. The cabinets are manufactured in depths of 400 and 500 mm and heights of 12, 17, and 21U. We also offer a wide range of accessories and on request, we can also make cut-outs and perforations required for installation of equipment into enclosures.

MAIN ADVANTAGES

SALES CONTACT

Michal Pavelka
tel.: +420 725 791 536
e-mail: michal.pavelka@conteg.cz

 

TECHNICAL INFORMATION

Parameter WME-O19 WME-X19
Material

Enclosure: stainless steel 1.4016 (AISI 403), on request stainless steel 1.4301 (AISI 304)

Mounting plate: zinc-plated sheet steel

19" extrusions: zinc-plated sheet steel

Glazed door version: 4mm hardened glass

Enclosure: stainless steel 1.4301 (AISI 304), on request stainless steel 1.4404 (AISI 316L)

Mounting plate: zinc-plated sheet steel

19" extrusions: zinc-plated sheet steel

Glazed door version: 4mm hardened glass

Enclosure surface finish

Polyester powder coating

Fine ground surface

Degree of protection

IP66 according to EN 60529 (the degree of protection may be reduced after mounting accessories)

IP66 according to EN 60529 (the degree of protection may be reduced after mounting accessories)

Mechanical durability

IK10 according to IEC 62262
IK08 for glass

IK10 according to IEC 62262
IK08 for glass

Supply includes

Single-door enclosure. The doors are equipped with a polyurethane foam seal all around the perimeter and a rotary lock or 3-point locking system from a height of 1 000 mm.

Perforated mounting rails on the doors

Perforated mounting rails on the sides

Mounting plate with a marked raster 50 × 50 mm

19" extrusions, 1 pair

Clean design, without cable glands

Accessories for wall-mounting

Single-door enclosure. The doors are equipped with a polyurethane foam seal all around the perimeter and a rotary lock or 3-point locking system from a height of 1 000 mm.

Perforated mounting rails on the doors

Perforated mounting rails on the sides

Mounting plate with a marked raster 50 × 50 mm

19" extrusions, 1 pair

Clean design, without cable glands

Accessories for wall-mounting