Accessories

The lighting unit with a motion sensor is equipped with a magnet and can therefore be easily placed anywhere in the cabinet.

Discontinued product Temperature sensor for placement inside cabinets. Up to 8 sensors can be chained to a single smart port.

The expander expands the intelligent port with 8 additional inputs/outputs.

The sensor detects the presence or absence of flowing air inside the cabinet.

A siren with a flashing light serves as a visual and acoustic alarm for the operator.

Smoke detector is an essential security element of data centers and server rooms.

The RJ45-RJ-45 connector (category 5e) is used to extend the sensor cable.

A spot flooding detector indicates the presence of water in a given location.

The input/output contact is used for reading or controlling connected external devices, e.g. security or fire systems.

The magnetic contact serves as a monitoring element that detects opening of the cabinet. Can be applied not only to the doors but also to the side panels.

Controlled output is used to control the supply of power to external devices.

The 4-20mA converter is used to integrate industrial sensors with an analog signal.

Temperature sensor with 30 cm long cable

Temperature and humidity sensor with a 30 cm long cable.

Encased extendable sensor for placement inside cabinets, measures temperature and humidity.

Water rope sensor with 3 m long detection cable protects water-sensitive equipment inside the cabinet from potential destruction.

A water rope sensor-based flood detector with localization is able to detect the presence of water and determine the location of the leak.

Serves as a monitoring element that detects the opening of the cabinet.

Designed for connecting WME series cabinets into rows while maintaining IP protection.

Complete assembly for attaching the cabinet to a pole.

Mounting kits for direct installation of the cabinet on the wall.

Vertical rails for mounting of IT components (19" and 21") and telecommunications equipment (ETSI).

Internal 19" fixed rails for installation of IT/telco equipment.

The combination of rails is suitable for the installation of heavier equipment, or the creation of additional mounting planes in all 3 axes.

Mounting plate for outdoor control cabinets outTEG OMR

Connecting frame for outdoor cabinet rows

Welded frame to be set in a concrete plinth.

The perforated roof improves outflow of warm air from the outTEG OMR outdoor cabinets.

Complete roof fan and perforated roof assembly

For OMR outdoor cabinets without air conditioning solution

Side panels with double-shell design with a fan, filter and outlet grate for OMR-DN-xxxxxx-R outdoor cabinets.

For outTEG OMR outdoor cabinets, consisting of outer and inner shell, ready for cutouts.

Door switch for lighting, fan or air conditioning control, for FSE and FSM cabinets

Screw eyes for transport by crane

Vertical perforated mounting rails for component installation.

Bimetal thermostat for cooling and heating with temperature range of 0 to 60 °C, mounted on a DIN rail

A humidistat is a device that switches on heating units, fans or heat exchangers when the preset relative humidity value is exceeded to prevent moisture condensation inside the cabinet.

A device for compensating the pressure building inside the cabinet due to ambient temperature fluctuations.

Accessories for condensate drainage in use cases with great fluctuations in ambient temperatures.

Filter inserts for fan units.

Relay Box 8 creates 8 relay outputs from a single intelligent port.

A motion sensor is a security element detecting movement in the monitored area.

Temperature and humidity sensor with 2 RJ12 connectors and 3 m cable.

1-Wire outdoor temperature sensor with RJ12 connector and 3 m cable.

PowerBox - remote switching of external devices up to 230 V/10 A with voltage detection function.

PIR motion detector for RAMOS Mini main monitoring unit

Optical smoke detector with relay output for RAMOS Mini

Flooding detector without power source.

Universal power adapter 5V DC for RAMOS Mini.

Hub for connecting 2 sensors to a 1-Wire bus

Temperature sensor with 3 m long cable and RJ12 connector.

Temperature sensor with 3 m cable and RJ12 connector.