Vertical Extrusion
A unique combination of 19" extrusions, with many advantages.
Show
Doors
To access the content, racks are fitted by doors or rear panels and side panels. The customer can choose between 15 types of cladding.
Show
Side and rear panels
To access the content, racks are fitted by doors or rear panels and side panels. The customer can choose between 15 types of cladding.
Show
Modular Plinths
Plinths are aesthetic and stabilizing features for free-standing racks. They come in a standard height and are an alternative to adjustable feet and castors.
Show
Door Locks
Racks equipped with doors always with lock system. This provides basic security for the equipment.
Show
Electronic Handle
Electronic handle for mounting directly onto a rack door.
Show
Electronic door lock with built in card reader
An electronic door lock with the build-in card reader and door contact sensor enables to connect directly to the RAMOS Optimax or RAMOS Plus main units.
Show
Electronic Handle with Card Reader
Electronic handle with built in card reader for mounting directly onto a rack door.
Show
Face Recognition Reader with a Multi-format RFID Reader
The on-wall biometric reader for face recognition with a multi-format RFID reader.
Show
Keypad with Card Reader
Keypad with built-in card reader (EM format) for the RAMOS ACS access control system.
Show
RAMOS Ultra ACS
The main control and monitoring unit of the access control system RAMOS ACS.
Show
Ramos Mini
The RAMOS Mini is a monitoring device suitable for stand-alone racks or cabinets. IT allows connection for up to 3 sensors and 1 input and 1 output contact (change-over relay). You can see the measurement in a graph with the values of the sensor.
Show
RAMOS Optimax
Monitoring device suitable for multiple racks or server rooms with a height of 1U can monitor up to 150 sensors. Also available in GSM variant.
Show
Ramos Plus
RAMOS Plus is the smallest model from the RAMOS range of intelligent monitoring devices.
Show
Ramos Ultra
These monitoring devices with expanders allow you to connect up to 500 intelligent sensors. RAMOS Ultra also supports direct connection to GSM Modem, Modbus and many other standard Serial Communications Protocols.
Show
Vertical Wire Management Panels—plastic
Vertical wire management panels are used for vertical cable management in free-standing racks, 800 mm wide.
Show
Horizontal HDWM
1 to 3U tall panels in one-sided or double-sided design for safe routing of the maximum number of patch cords to vertical panels.
Show
HDWM Extended Version with Longer Fingers
1 to 3U tall panels, for safe routing of the maximum number of patch cords to vertical panels. The extended version will allow almost a single capacity.
Show
Vertical HDWM for RSF/RDF/RI7/Ri7 Server, Width 800 mm
Vertical, high-density cable management panels for free-standing racks used for safe storage and connection of patch cords leading between horizontal panels.
Show
Wire Management Panels with Metal Brackets
Fastening panels with metal brackets are used for horizontal management and routing of cables in a rack.
Show
Wire Management Panels with Plastic Brackets
Fastening panels with plastic brackets are used for horizontal management and routing of cables in a rack.
Show
Wire Management Panels with Plastic Ducts
Vertical wire management panels are used for horizontal cable management in free-standing racks as well as wall-mounting and SOHO racks.
Show
Wire Management Panels with Plastic Brackets
10" wire management panels with plastic brackets for SOHO Mini REH
Show
Holders of Vertical Wire Management Panels and Brackets
Holders of fastening panels are used for the installation of vertical fastening panels and cable loops in free-standing racks 800mm wide.
Show
Side Cable Perforated Panels
Side perforated fastening panels are used for vertical cable routing in free-standing racks in the space between the front and rear 19" extrusions and the side panel.
Show
Cable Basket Trays
The cable basket trays are used for cable routing in free-standing racks in the area between the front and rear 19" extrusions and the side panel
Show
Basic PDUs
The basic power distribution panels are used for power supply and its distribution to individual IT equipment in the racks.
Show
Monitored PDUs
The monitored power distribution units enable remote monitoring of energy consumption (input metering) and metering on each individual outlet.
Show
Managed PDUs
The managed power distribution units enable remote monitoring of energy consumption (input metering) and metering on each individual outlet including the ability to control the outlets.
Show
Brackets for vertical installation of PDU
For vertical installation of a power distribution unit into IT rack, it is necessary to order the appropriate bracket for basic, monitored and managed PDUs, which is not included in the package.
Show
Inline Meter
The 1-phase or 3-phase inline power meter with an illuminated display is designed for measuring parameters on the lead-in cable to basic PDUs and is easy to connect into existing circuits.
Show
LITE Ventilation Unit
Ventilation units are used for cooling low heat-dissipating equipment installed in a rack.
Show
High-end EC Fans
Fans are used for cooling low heat-dissipating equipment installed in a rack. Very low power consumption.
Show
Ventilation Units with AC Fans
Ventilation units and fans are used for cooling low heat-dissipating equipment installed in a rack. For medium and high thermal loads, we recommend air-conditioning units from our Targeted Cooling portfolio.
Show
LED Light
Complete lighting units with rocker switch and inter-connection cables light up the interior of the FSE/FSM cabinet, option of connecting several light fixtures.
Show
Fixed Lite Shelves with load rate up to 20 kg
Fixed shelves are designed for placing equipment that is not 19" mountable. The entire area of the shelves is perforated to ensure efficient ventilation.
Show
Fixed Shelves with Load Rate up to 60 kg
Fixed shelves are designed for placing equipment that is not 19" mountable. The entire area of the shelves is perforated to ensure efficient ventilation.
Show
Fixed High-Load Shelves with load rate up to 100 kg
Fixed shelves are designed for placing equipment that is not 19" mountable. The entire area of the shelves is perforated to ensure efficient ventilation.
Show
Pull-out Shelves with load rate up to 25kg
Pull-out shelves offer safe support for equipment that does not have mounting possibilities. The telescopic design make it easy to access the equipment.
Show
Pull-out high load shelves
Pull-out shelves offer safe support for equipment that does not have mounting possibilities. The telescopic design make it easy to access the equipment.
Show
Drawers and Holders
The holders are designed to support a keyboard or monitor. Drawings, technical documentation, etc., can be stored in the rack drawers.
Show
Fiber-Optic Splice Box
Fiber-optic splice boxes are used for the termination and fiber slack management of fiber-optic cables within racks.
Show
Patch panels for KEYSTONE modules
Patch panels are mounted on the 19" vertical extrusions and allow cable termination.
Show
Patch Panels for SOHO Mini REH
3 type of patch panels.
Show
Fastening and earthing bars for patch panels
CONTEG racks include a standard earthing kit.
Show
19" panels with earthing bar
Conteg racks include a standard earthing kit.
Show
Earthing bars
Conteg racks include a standard earthing kit.
Show
Castors and Feet
Conteg free-standing racks have a standard configuration with height-adjustable feet. The feet can be replaced by castors or plinths.
Show
Mounting Kit
The mounting kit is used to mount the equipment to the vertical extrusions.
Show
Fasteners
Cage nuts, screws, hinge, pull-out brackes, fasteners.
Show