Accessories
We offer a wide range of accessories for products in our portfolio, including shelving, fiber-optical products, patch panels, earthing bars, modular plinths, castors and feet, mounting and connecting kits and rack casing.
Side and rear panels
To access the content, racks are fitted by doors or rear panels and side panels. The customer can choose between 15 types of cladding.
Show
Top/Bottom PREMIUM Plates
PREMIUM racks offer users a flexible solution. The top and bottom covers can be interchanged to fit the user's needs.
Show
Fixed Lite Shelves with load rate up to 20 kg
Fixed shelves are designed for placing equipment that is not 19" mountable. The entire area of the shelves is perforated to ensure efficient ventilation.
Show
Fixed Shelves with Load Rate up to 60 kg
Fixed shelves are designed for placing equipment that is not 19" mountable. The entire area of the shelves is perforated to ensure efficient ventilation.
Show
Fixed High-Load Shelves with load rate up to 100 kg
Fixed shelves are designed for placing equipment that is not 19" mountable. The entire area of the shelves is perforated to ensure efficient ventilation.
Show
Pull-out Shelves with load rate up to 25kg
Pull-out shelves offer safe support for equipment that does not have mounting possibilities. The telescopic design make it easy to access the equipment.
Show
Pull-out high load shelves
Pull-out shelves offer safe support for equipment that does not have mounting possibilities. The telescopic design make it easy to access the equipment.
Show
Drawers and Holders
The holders are designed to support a keyboard or monitor. Drawings, technical documentation, etc., can be stored in the rack drawers.
Show
Supporting Rails and Adaptors
These rails are used to hold non-19" mountable equipment in the free-standing PREMIUM, OPTIMAL and iSEVEN rack series.
Show
Fiber-Optic Splice Box
Fiber-optic splice boxes are used for the termination and fiber slack management of fiber-optic cables within racks.
Show
Patch panel for LSA-PLUS modules
Patch panels are installed on the 19" vertical extrusions and used for cable termination.
Show
Door Locks
Racks equipped with doors always with lock system. This provides basic security for the equipment.
Show
Modular Plinths
Plinths are aesthetic and stabilizing features for free-standing racks. They come in a standard height and are an alternative to adjustable feet and castors.
Show
Supporting Rails and Adaptors
These rails are used to hold non-19" mountable equipment in the free-standing PREMIUM, OPTIMAL and iSEVEN rack series.
Show
Castors and Feet
Conteg free-standing racks have a standard configuration with height-adjustable feet. The feet can be replaced by castors or plinths.
Show
Protection of Cable Openings
Cable protection and anti-dust panels can protect cables and help limit dust buildup in a rack. They are installed into the cable openings.
Show
Lighting Unit
The lighting unit with a motion sensor provides light is equipped with a magnet and can therefore be easily placed anywhere in the cabinet.
Show
Patch panels for KEYSTONE modules
Patch panels are mounted on the 19" vertical extrusions and allow cable termination.
Show
Eccentric Extrusion
Possible to install in racks: RDF and RSF (800 mm) width only with U type extrusions supported for 42U and 45U racks.
Show
10" SOHO Accessories
The REH SOHO racks are the only Conteg racks with 10" vertical extrusion spacing.
Show
Wire Management Panels with Plastic Brackets
10" wire management panels with plastic brackets for SOHO Mini REH
Show
10" Fiber-Optic Splice Box
For use with modular front panel (ORS-08ST, ORS-08SC, ORS-04DSC, ORS-08FC, ORS-04FCD).
Show
RAMOS Ultra-EX-O16
Easy to use expander for adding 16 optoisolated dry contact inputs to Ramos Ultra, RAMOS ACS, and RAMOS Optimax Solution.
Show
RAMOS Ultra-EX-I8
Easy to use expander for adding 8 intelligent ports to RAMOS Ultra, RAMOS ACS, and RAMOS Optimax solutions.
Show
Daisy-chain Temperature Sensor
Daisy-chain temperature sensor with a 1.5 m long cable. Up to 8 sensors can by connected in the daisy-chain to a single intelligent port.
Show
Expander for Intelligent Port
The expander is used for expanding an intelligent port up to 8 dry contacts (input/output).
Show
Air-flow sensor
The air-flow sensor is a device that checks airflow in areas where consistent airflow is necessary.
Show
Siren & strobe light
The Siren & Strobe sensor is a combination sensor that emits a loud piercing sound and a visual blinking strobe light. It is an important addition to security and safety.
Show
Dry contact
The dry contact is used to connect external devices, such as security or fire systems, or any application that requires control by the unit.
Show
Magnetic door contact
Magnetic door contact is a security feature for door or side panel status monitoring.
Show
AC-Sensor controlled relay—normally open (110V/220V)
The AC-Sensor controlled relay is the controlling power for external devices.
Show
Rope Water Locate Sensor
The rope water locating sensor is designed for specific location water detection.
Show
Temperature and Humidity Sensor
The encased temperature and humidity sensor is designed for placement into racks and measures temperature and humidity.
Show
BEX Basic Expander
Ramos Optimax expansion unit allows chain connection via the BEX port and adds another 8 intelligent ports and 10 digital inputs to the main monitoring unit.
Show
Sensors for thermal mapping
Sensors for complete monitoring of the environment in racks, where it is possible to determine hotspots and adjust the installation of IT hardware, the performance of the cooling unit, etc.
Show
Sensor Adapter for External Sensor
The Sensor Adapter makes it easy to connect 3rd party analog sensor with output 0-10 V DC.
Show
Programmable Display
The display shows up to 8 parameters from any intelligent or virtual sensor, in addition it measures 1 temperature.
Show
PIR motion detector
Motion detector with 60° detection angle and 3 m detection distance; used for securing rooms or buildings and sending alerts.
Show
Modbus RTU Adapter
Convert the MOD/EXP port on the RAMOS Optimax main monitoring unit in to serial ModbusPort.
Show
Electronic door lock with built in card reader
An electronic door lock with the build-in card reader and door contact sensor enables to connect directly to the RAMOS Optimax or RAMOS Plus main units.
Show
Rack Door Unit
Rack Door Unit for a daisy chain to the main control and monitoring unit via expansion ports.
Show
Face Recognition Reader with a Multi-format RFID Reader
The on-wall biometric reader for face recognition with a multi-format RFID reader.
Show
Dual Contactless Multi-format Reader
The dual contactless multi-format reader can read card or chip key and is compatible with mobile phones equipped with NFC technology.
Show
Keypad with Card Reader
Keypad with built-in card reader (EM format) for the RAMOS ACS access control system.
Show
USB Card Reader
The desktop dual card reader for PC is a handy peripheral for user card administration in the CONTEG Pro Server App.
Show
Electronic Handle with Card Reader
Electronic handle with built in card reader for mounting directly onto a rack door.
Show
Hub for Electronic Handles
Hub for connecting two electronic handle on a single access control RDU unit.
Show
Electromagnetic Lock—small
Electromagnetic door lock suitable for racks that cannot be fitted with a CONTEG electronic handle.
Show
Electromagnetic Lock - large
Electromagnetic door lock (large and waterproof) suitable for mounting onto entrance doors.
Show
Wire Temperature sensor for Mini
Wire Temperature sensor the RMS‑ST‑02 1-Wire Temperature sensor comes with a 3 m long cable with an RJ12 connector.
Show
Wire Humidity sensor
Wire Humidity sensor the RMS‑SH‑02 1‑Wire Humidity sensor comes with a 3 m long cable with an RJ12 connector.
Show
One wire temperature and humidity sensors
RMS‑STH‑02, wire temperature and humidity sensors, rack mounting kit, a 3 m long cable, 2x RJ12 connector.
Show
1‑Wire Temperature OUTDOOR sensor
1-Wire temperature outdoor sensors with an RJ12 connector and 3 m long cable.
Show
PowerBox, remote switching external devices
RMS‑PWR‑01 PowerBox, enables remote switching of external devices up to 230V/10A and has a power detection feature.
Show
Inline Meter
The 1-phase or 3-phase inline power meter with an illuminated display is designed for measuring parameters on the lead-in cable to basic PDUs and is easy to connect into existing circuits.
Show
Temperature & Humidity Sensor
The sensor reads temperature and humidity inside the IT rack. It connects via a 2.5 m cable directly to a monitored or managed PDU.
Show
Universal power adapter 5V DC
Universal power adapter 5 V DC RMS‑PW‑05 universal power adapter.
Show
Output Power Cables
Output power cables are used for transmitting electrical energy between the PDU and an IT device inside the IT rack.
Show
Input Power Cables
1-phase 16 A monitored and managed PDUs are supplied without a lead-in cable.
Show
Hub for connecting of 2 sensors
Hub for connecting 2 sensors RMS‑CON‑04 Hub for connecting 2 sensors to the 1‑Wire bus.
Show
Brackets for vertical installation of PDU
For vertical installation of a power distribution unit into IT rack, it is necessary to order the appropriate bracket for basic, monitored and managed PDUs, which is not included in the package.
Show
Baying Kits for Fee Standing Racks
The connecting kit is used to connect (bay) free-standing racks with of the same height and depth in one row
Show