Cooling and Ventilation

Based on an innovative principle of dual-fluid cooling that combines water-based and direct expansion cooling.

Works on the direct expansion principle, with refrigerant circulating between one indoor and one outdoor unit (equipped with a compressor).

In-row cooling units designed to be connected to any type of chilled water.

Chilled water in-row cooling unit is designed to be connected to any system with chillers producing cold water.

Based on the direct expansion principle. A compressor is integrated inside the indoor unit, which is connected to its outdoor condenser.

Based on the direct expansion principle. A compressor is integrated inside the indoor unit, which is connected to its outdoor condenser.

Cooling units with direct evaporation for precise air conditioning that do not take up any space. They offer advanced cooling performance management and install directly on IT cabinets.

Cooling units for precise air conditioning with a high degree of security for installation on IT cabinets - water cooling with BCHJ

In-rack cooling units as compact yet powerful rear-door modules.

This cooling unit with a height of 7U is designed to be installed on rails inside a 19" cabinet and is based on a split cooling system (with an indoor and outdoor unit).

The CoolOut outdoor condensing unit is specially designed for heat removal from data centers. The unit meets very high requirements for accuracy, stability and durability that are essential for data center operations.

4U high, Direct-to-Chip liquid cooling unit designed for installation inside 19" racks.

7U high, 2-phase Direct-to-Chip liquid cooling unit designed for installation inside 19" racks.

Water cooled room cooling units are designed to be connected to any system with a cold water source.

Room cooling units based on the direct expansion principle. A compressor is integrated into the indoor unit, which is connected to its outdoor condenser.

Combines the advantages of CW and XC systems — free-cooling for low and medium outdoor temperatures and direct expansion cooling for use during high outdoor temperatures. The system thus reaches optimal minimum operating costs without the need to compromise.

Small rooftop air conditioning units for perfect air separation, conserve space in the server room.

Small wall-mounted air-conditioning units, chilled water-based for increased performance or greater safety thanks to the backup source of cold.

Roof-mounted air conditioning units with direct evaporation are designed for installation on the top panel of the cabinet. The portfolio includes options for low, medium and high heat loads thanks to a cooling capacity of up to 6 kW.

Wall-mounted air conditioning units are installed in place of one of the side panels of the cabinet. The wall-mounted air conditioning units are designed for low to medium heat loads.

Ventilation units and fans are used to cool the equipment in the cabinet using air drawn from the room. Suitable primarily for lower heat loads.

Ventilation units and fans are used to cool the equipment in the cabinet using air drawn from the room, being notable primarily for their low power consumption.

Ventilation units are used to cool the equipment in the cabinet using air drawn from the room.

These panels mount on 19" vertical rails. Blanking panels are used to blind empty positions in the cabinet. They significantly increase the cooling efficiency of the cabinet.

Passive air flow control elements direct the air flow inside the cabinet and create separate zones. Their application is a prerequisite for effective cooling.

Passive air flow control elements direct the air flow inside the cabinet and create separate zones. Their application is a prerequisite for effective cooling.

Passive air flow control elements direct the air flow inside the cabinet and create separate zones. Their application is a prerequisite for effective cooling.

It allows the cable to be routed from front to back through free positions in the cabinet and helps to minimize the passage of air.