Top Ducts

Top Ducts

Top Ducts are designed to provide safe, easy-to-use, and cost-effective management system for copper cables above the racks. Top Ducts are simple to install and at the same time allow for easy installation, manipulation, and re-patching of cooper cables between server, network and UPS racks. The system is designed to provide a simple connection between the rack rows without ceiling orother exterior support. This solution reduces the installation time and the rack layout can be easily changed. The connection between rack rows can be multi-layered and can be combined with the Conteg OptiWay pathway system to provide independentroutes for fiber cables. The solution complies with market requirements, recommendations, and best practices.

MAIN ADVANTAGES:

  • Designed for copper cables above racks
  • Simple connection between racks and rows of racks
  • Compatible and combinable with OPTIWAY
  • Backbone cable management system above racks
  • Length corresponding to rack width
  • Easy installation, maximal tool-less support
  • Adjustable cross-connection ducts above corridors and contained aisles

MAIN COMPONENTS:

  • Top Duct
  • Cross connection
  • Radius protectors and accessories
  • Supporting brackets for use with Conteg OptiWay pathway system
  • Supporting brackets for use withoutConteg OptiWay pathway system
  • Accessories for cablemanagement

Cable fill calculator

 

Where to buy
Print Favorities E-mail Twitter RSS
  • Conteg -Top DuctsConteg -Top DuctsConteg -Top DuctsTop Duct CPW-20CA_02Top Duct CPW-20CAC-0U_02Top Duct CPW-20CAC-3UTop Duct CPW-20-CC
  • Top Duct CPW-20CC-SMTop Duct CPW-20CDC260_02Top Duct CPW-20-ECTop Duct CPW-20-R10Top Duct CPW-20-R17Top Duct CPW-20-R20Top Duct CPW-20TAC-0U
  • Top Duct CPW-20TAC-3UTop Duct CPW-20TD80Top Duct CPW-20TDC80Top Duct CPW-BR-BRTop Duct CPW-ORB-100Top Duct  CPW-RRB-100

Top Ducts

The Top Duct solution provides a backbone cable management system above a rack. The basic length segments correspond with the rack’s width and can be easily removed and later installed back in without affecting neighboring racks. All cable ducts can be covered by tool-less covers. The main duct has perforations and can be used with all cover types and their combinations. The duct profile is 200x70 mm. The end member length of 350 mm is recommended for places where it is not possible to use a full length cable duct.

 

Main Duct   
Code   Dimensions (mm)   Package
 H  W  L
MAIN DUCT
CPW-20TD30 70 200 300 2 pcs
CPW-20TD40 70 200 400 2 pcs
CPW-20TD60 70 200 600 2 pcs
CPW-20TD80 70 200 800 2 pcs
CPW-20TD35 70 200 350 1 pc
COVERS  
CPW-20TDC10 200 100 2 pcs
CPW-20TDC20 200 200 2 pcs
CPW-20TDC30 200 300 2 pcs
CPW-20TDC40 200 400 2 pcs
CPW-20TDC50 200 500 2 pcs
CPW-20TDC60 200 600 2 pcs
CPW-20TDC80 200 800 2 pcs
CPW-20TDC35 200 350 1 pc

Cross connection  

Cross ConnectionThe cross connection duct allows a cable management system to be installed across one or more rack rows. It includes several adjustable features enabling to achieve the required duct length on a multilevel basis. Ducts can be covered by tool-less covers.

Cross connection   
Code   Dimensions (mm)
Package
H W L
CPW-20CD100 70 200 1034 – 1480 1 pc
CPW-20CD140 70 200 1434 – 2280 1 pc
CPW-20CD180 70 200 1834 – 3080 1 pc
CPW-20CD220 70 200 2234 – 3880 1 pc
CPW-20CD260 70 200 2634 – 4680 1 pc

Cover   

CPW-20CDC100  – 200 1034 – 1480 2 pcs
CPW-20CDC140  – 200 1434 – 2280 2 pcs
CPW-20CDC180  – 200 1834 – 3080 2 pcs
CPW-20CDC220  – 200 2234 – 3880 2 pcs
CPW-20CDC260  – 200 2634 – 4680 2 pcs

Top Ducts accessories

Used for multilevel cross connection. The system can be used with/without contained aisle solutions for racks that are 42U, 45U or 48U in height.

Cross and Tee members – for multilevel intersection 
Code  Description  Package
CPW-20CA Cross member between CPW-20TDxx and 2x CPW-20CDxx (for CPW-20CDxx when using crosswise) 1 pc
CPW-20CC-SM Set of 2 support brackets for CPW-20CDxx; only for CCA with 42U racks or for crossover 1 pair
CPW-20CAC-0U Cover for cross member CPW-20CA 1 pc
CPW-20CAC-3U Cover for cross member CPW-20CA, offset use 1 pc
CPW-20TAC-0U Cover of tee connection from CPW-20CDxx to CPW-20TDxx when 45U and 48U racks are used 1 pc
CPW-20TAC-3U Cover of tee connection from CPW-20CDxx to CPW-20TDxx when CCA or CPW-20CC-SM are used; only for 42U racks 1 pc
Cable Duct accessories 
CPW-20-R17 Radius cable protection for CPW-20TDxx, 170 mm width; 2 pieces with plastic pins 2 pcs
CPW-20-R10 Radius cable protection for CPW-20TDxx, 100 mm width; 2 pieces with plastic pins 2 pcs
CPW-20-R20 Radius cable protection for end of CPW-20TDxx or CPW-20CDxx, 200 mm width; 2 pieces with plastic pins 2 pcs
CPW-20-EC End cap of CPW-20TDxx; 2 pieces 2 pcs
CPW-20-CC Connecting kit for CPW-20TDxx for direct application on roof of rack, pack of 10, not necessary when using CPW-RRB-xx 10 pcs
Cable management 
DP-KP-LEM Rubber piece for edges of 790 mm cable entry opening 1 pc
HDWM-VCT Velcro cable ties, 25x300 mm, pack of 10, black 10 pcs
HDWM-VCT-B Velcro cable belt, 13x5000 mm, 1 piece, black 1 pc
HDWM-VCT-S Velcro cable ties-small, 13x190 mm, pack of 25, black 25 pcs

Supporting Brackets

Top Ducts can be installed directly onto the roof of the rack with or without the OptiWay pathway system. The supporting brackets that are intended for use without OptiWay can be easily installed and adjusted above the racks. The supporting brackets that are intended for use with OptiWay combine both the OptiWay and top duct systems. These supporting brackets are equipped with holes for the threaded rods used to support the OptiWay system at different levels.

Supporting brackets without Optiway    
Code Bracket length in mm Type of mounting Recommended rack depth in mm Mounting holes Package
CPW-BR-BR –  Top duct bracket for installation of CPW-RRB on racks RSF/RDF  –  – 1 pc
CPW-RRB-40 340 Top duct half-size mounting bracket for installation of cable duct CPW-20TDxx on roof of rack, 80 cm depth 800 2 1 pc
CPW-RRB-50 440 Top duct half-size mounting bracket for installation of cable duct CPW-20TDxx on roof of rack, 100 cm depth 1000 2 1 pc
CPW-RRB-60 540 Top duct half-size mounting bracket for installation of cable duct CPW-20TDxx on roof of rack, 120 cm depth 1200 2 1 pc
CPW-RRB-80 740 Top duct full-size mounting bracket for installation of cable duct CPW-20TDxx on roof of rack, 80 cm depth 800 3 1 pc
CPW-RRB-100 940 Top duct full-size mounting bracket for installation of cable duct CPW-20TDxx on roof of rack, 100 cm depth 1000 3 1 pc
CPW-RRB-120 1 140 Top duct full-size mounting bracket for installation of cable duct CPW-20TDxx on roof of rack, 120 cm depth 1200 3 1 pc

 

Supporting brackets with Optiway    
Code Bracket length in mm Type of mounting Recommended rack depth in mm Mounting holes Package
OPW-TR-BR  – Bracket for installing threaded rod on racks RSF/RDF 1 pc
OPW-TR-16/20 210 Rack mounting threaded rod for OptiWay, M16, 21 cm length 1 pc
OPW-TR-16/40 400 Rack mounting threaded rod for OptiWay, M16, 40 cm length 1 pc
OPW-TR-16/60 600 Rack mounting threaded rod for OptiWay, M16, 60 cm length 1 pc
OPW-TR-16/100 1000 Threaded rod for OptiWay, M16, 100 cm length 1 pc
OPW-TR-16/200 2000 Threaded rod for OptiWay, M16, 200 cm length 1 pc
OPW-TR-CM OptiWay-ceiling mounting holder for threaded rod 1 pc
CPW-ORB-40 380 Top duct half-size mounting bracket for installing cable duct CPW-20TDxx on roof of rack, 80 cm depth; used with OptiWay (OPW-TR-BR and OPW-TR-16/xx needed) 800 2 1 pc
CPW-ORB-50 480 Top duct half-size mounting bracket for installing cable duct CPW-20TDxx on roof of rack, 100 cm depth; used with OptiWay (OPW-TR-BR and OPW-TR-16/xx needed) 1000 2 1 pc
CPW-ORB-60 580 Top duct half-size mounting bracket for installing cable duct CPW-20TDxx on roof of rack, 120 cm depth; used with OptiWay (OPW-TR-BR and OPW-TR-16/xx needed) 1200 2 1 pc
CPW-ORB-80 680 Top duct full-size mounting bracket for installing cable duct CPW-20TDxx on roof of rack, 80 cm depth; used with OptiWay (OPW-TR-BR and OPW-TR-16/xx needed) 800 3 1 pc
CPW-ORB-100 880 Top duct full-size mounting bracket for installing cable duct CPW-20TDxx on roof of rack, 100 cm depth; used with OptiWay (OPW-TR-BR and OPW-TR-16/xx needed) 1000 3 1 pc
CPW-ORB-120 1080 Top duct full-size mounting bracket for installing cable duct CPW-20TDxx on roof of rack, 120 cm depth; used with OptiWay (OPW-TR-BR and OPW-TR-16/xx needed) 1200 3 1 pc
CPW-CDB Top duct cross connection support - rack or ceeling installation (used with threaded rods and mounting brackets)   2 1 pc
File type Language version

  • Datasheet Top Ducts (PDF - 2.37MB)
    cs  de  en  fr  ru   
  • Cable fill calculator (XLSX - 0.13MB)
    en   

Datasheet:

data_sheet_RHF