Accessories for RAMOS Optimax—IT and Telco | CONTEG

RAMOS Optimax

A wide range of accessories for the main monitoring unit, such as detectors, sensors, sirens, magnetic door contacts, expansion modules, etc.

BEX Basic Expander

Ramos Optimax expansion unit allows chain connection via the BEX port and adds another 8 intelligent ports and 10 digital inputs to the main monitoring unit.

Show

Sensors for thermal mapping

Sensors for complete monitoring of the environment in racks, where it is possible to determine hotspots and adjust the installation of IT hardware, the performance of the cooling unit, etc.

Show

Sensor Adapter for External Sensor

The Sensor Adapter makes it easy to connect 3rd party analog sensor with output 0-10 V DC.

Show

Programmable Display

The display shows up to 8 parameters from any intelligent or virtual sensor, in addition it measures 1 temperature.

Show

PIR motion detector

Motion detector with 60° detection angle and 3 m detection distance; used for securing rooms or buildings and sending alerts.

Show

Modbus RTU Adapter

Convert the MOD/EXP port on the RAMOS Optimax main monitoring unit into serial ModbusPort.

Show

Mini Sensor Controlled Relay

The device allows you to adjust the voltage level of the signal.

Show

RAMOS Ultra-EX-O16

Easy to use expander for adding 16 optoisolated dry contact inputs to Ramos Ultra, RAMOS ACS, and RAMOS Optimax Solution.

Show

RAMOS Ultra-EX-I8

Easy to use expander for adding 8 intelligent ports to RAMOS Ultra, RAMOS ACS, and RAMOS Optimax solutions.

Show

Daisy-chain Temperature Sensor

Daisy-chain temperature sensor with a 1,5 m long cable. Up to 8 sensors can by connected in the daisy-chain to a single intelligent port.

Show

Expander for Intelligent Port

The expander is used for expanding an intelligent port up to 8 dry contacts (input/output).

Show

Relay Box 8

Relay Box 8 creates 8 relay outputs on a single intelligent port.

Show

Air-flow sensor

The air-flow sensor is a device that checks airflow in areas where consistent airflow is necessary.

Show

Siren & strobe light

The Siren & Strobe sensor is a combination sensor that emits a loud piercing sound and a visual blinking strobe light. It is an important addition to security and safety.

Show

Smoke Detector

Smoke detector is important for security and safety.

Show

Coupler for extension

CAT 5e RJ45-RJ45 coupler is used to extend the sensor cable.

Show

Spot water sensor

Spot water sensors can detect water breaches.

Show

Dry contact

The dry contact is used to connect external devices, such as security or fire systems, or any application that requires control by the unit.

Show

Rope water sensor

Rope water sensors can detect if there is water on detection ropes.

Show

Magnetic door contact

Magnetic door contact is a security feature for door or side panel status monitoring.

Show

AC-Sensor controlled relay—normally open (110V/220V)

The AC-Sensor controlled relay is the controlling power for external devices.

Show

4-20 mA Converter

The 4-20 mA convertor is used for integrating an analog signal.

Show

Rope Water Locate Sensor

The rope water locating sensor is designed for specific location water detection.

Show

Temperature and Humidity Sensor

The encased temperature and humidity sensor is designed for placement into racks and measures temperature and humidity.

Show