Accessories—IT and TELCO | CONTEG

Accessories

We offer a wide range of accessories for products in our portfolio, including shelving, fiber-optical products, patch panels, earthing bars, modular plinths, castors and feet, mounting and connecting kits and rack casing.

Doors

To access the content, racks are fitted by doors or rear panels and side panels. The customer can choose between 15 types of cladding.

Show

Side and rear panels

To access the content, racks are fitted by doors or rear panels and side panels. The customer can choose between 15 types of cladding.

Show

Top/Bottom PREMIUM Plates

PREMIUM racks offer users a flexible solution. The top and bottom covers can be interchanged to fit the user's needs.

Show

Vertical Extrusion

A unique combination of 19" extrusions, with many advantages.

Show

Fixed Lite Shelves with load rate up to 20 kg

Fixed shelves are designed for placing equipment that is not 19" mountable. The entire area of the shelves is perforated to ensure efficient ventilation.

Show

Fixed Shelves with Load Rate up to 60 kg

Fixed shelves are designed for placing equipment that is not 19" mountable. The entire area of the shelves is perforated to ensure efficient ventilation.

Show

Fixed High-Load Shelves with load rate up to 100 kg

Fixed shelves are designed for placing equipment that is not 19" mountable. The entire area of the shelves is perforated to ensure efficient ventilation.

Show

Pull-out Shelves with load rate up to 25kg

Pull-out shelves offer safe support for equipment that does not have mounting possibilities. The telescopic design make it easy to access the equipment.

Show

Pull-out high load shelves

Pull-out shelves offer safe support for equipment that does not have mounting possibilities. The telescopic design make it easy to access the equipment.

Show

Drawers and Holders

The holders are designed to support a keyboard or monitor. Drawings, technical documentation, etc., can be stored in the rack drawers.

Show

Supporting Rails and Adaptors

These rails are used to hold non-19" mountable equipment in the free-standing PREMIUM, OPTIMAL and iSEVEN rack series.

Show

Fiber-Optic Splice Box

Fiber-optic splice boxes are used for the termination and fiber slack management of fiber-optic cables within racks.

Show

Patch panel for LSA-PLUS modules

Patch panels are installed on the 19" vertical extrusions and used for cable termination.

Show

Fastening and earthing bars for patch panels

CONTEG racks include a standard earthing kit.

Show

Earthing bars

Conteg racks include a standard earthing kit.

Show

Door Locks

Racks equipped with doors always with lock system. This provides basic security for the equipment.

Show

Modular Plinths

Plinths are aesthetic and stabilizing features for free-standing racks. They come in a standard height and are an alternative to adjustable feet and castors.

Show

19" panels with earthing bar

Conteg racks include a standard earthing kit.

Show

Supporting Rails and Adaptors

These rails are used to hold non-19" mountable equipment in the free-standing PREMIUM, OPTIMAL and iSEVEN rack series.

Show

Castors and Feet

Conteg free-standing racks have a standard configuration with height-adjustable feet. The feet can be replaced by castors or plinths.

Show

Mounting Kit

The mounting kit is used to mount the equipment to the vertical extrusions.

Show

Protection of Cable Openings

Cable protection and anti-dust panels can protect cables and help limit dust buildup in a rack. They are installed into the cable openings.

Show

Lighting Unit

The lighting unit with a motion sensor provides light is equipped with a magnet and can therefore be easily placed anywhere in the cabinet.

Show

Patch panels for KEYSTONE modules

Patch panels are mounted on  the 19" vertical extrusions and allow cable termination.

Show

Eccentric Extrusion

Possible to install in racks: RDF and RSF (800 mm) width only with U type extrusions supported for 42U and 45U racks.

Show

Patch Panels for SOHO Mini REH

3 type of patch panels.

Show

10" SOHO Accessories

The REH SOHO racks are the only Conteg racks with 10" vertical extrusion spacing.

Show

Blank Panel

An accessory for SOHO Mini REH 10"—blank panel.

Show

10" SOHO Accessories

The REH SOHO racks are the only Conteg racks with 10" vertical extrusion spacing.

Show

10" Fiber-Optic Splice Box

For use with modular front panel (ORS-08ST, ORS-08SC, ORS-04DSC, ORS-08FC, ORS-04FCD).

Show

RAMOS Ultra-EX-O16

Easy to use expander for adding 16 optoisolated dry contact inputs to Ramos Ultra, RAMOS ACS, and RAMOS Optimax Solution.

Show

RAMOS Ultra-EX-I8

Easy to use expander for adding 8 intelligent ports to RAMOS Ultra, RAMOS ACS, and RAMOS Optimax solutions.

Show

RAMOS Ultra USB Modem

USB Modem with audio cable (Quad-band)

Show

Daisy-chain Temperature Sensor

Daisy-chain temperature sensor with a 1,5 m long cable. Up to 8 sensors can by connected in the daisy-chain to a single intelligent port.

Show

Expander for Intelligent Port

The expander is used for expanding an intelligent port up to 8 dry contacts (input/output).

Show

Relay Box 8

Relay Box 8 creates 8 relay outputs on a single intelligent port.

Show

Air-flow sensor

The air-flow sensor is a device that checks airflow in areas where consistent airflow is necessary.

Show

Siren & strobe light

The Siren & Strobe sensor is a combination sensor that emits a loud piercing sound and a visual blinking strobe light. It is an important addition to security and safety.

Show

Smoke Detector

Smoke detector is important for security and safety.

Show

Coupler for extension

CAT 5e RJ45-RJ45 coupler is used to extend the sensor cable.

Show

Spot water sensor

Spot water sensors can detect water breaches.

Show

Dry contact

The dry contact is used to connect external devices, such as security or fire systems, or any application that requires control by the unit.

Show

Rope water sensor

Rope water sensors can detect if there is water on detection ropes.

Show

Magnetic door contact

Magnetic door contact is a security feature for door or side panel status monitoring.

Show

AC-Sensor controlled relay—normally open (110V/220V)

The AC-Sensor controlled relay is the controlling power for external devices.

Show

4-20 mA Converter

The 4-20 mA convertor is used for integrating an analog signal.

Show

Temperature sensor

Temperature sensor is with 30 cm cable.

Show

Temperature/ Humidity sensor

Temperature and humidity sensor is with 30 cm cable

Show

Rope Water Locate Sensor

The rope water locating sensor is designed for specific location water detection.

Show

Temperature and Humidity Sensor

The encased temperature and humidity sensor is designed for placement into racks and measures temperature and humidity.

Show

BEX Basic Expander

Ramos Optimax expansion unit allows chain connection via the BEX port and adds another 8 intelligent ports and 10 digital inputs to the main monitoring unit.

Show

Sensors for thermal mapping

Sensors for complete monitoring of the environment in racks, where it is possible to determine hotspots and adjust the installation of IT hardware, the performance of the cooling unit, etc.

Show

Sensor Adapter for External Sensor

The Sensor Adapter makes it easy to connect 3rd party analog sensor with output 0-10 V DC.

Show

Programmable Display

The display shows up to 8 parameters from any intelligent or virtual sensor, in addition it measures 1 temperature.

Show

PIR motion detector

Motion detector with 60° detection angle and 3 m detection distance; used for securing rooms or buildings and sending alerts.

Show

Modbus RTU Adapter

Convert the MOD/EXP port on the RAMOS Optimax main monitoring unit into serial ModbusPort.

Show

Mini Sensor Controlled Relay

The device allows you to adjust the voltage level of the signal.

Show

Electronic door lock with built in card reader

An electronic door lock with the build-in card reader and door contact sensor enables to connect directly to the RAMOS Optimax or RAMOS Plus main units.

Show

Rack Door Unit

Rack Door Unit for a daisy chain to the main control and monitoring unit via expansion ports.

Show

Face Recognition Reader with a Multi-format RFID Reader

The on-wall biometric reader for face recognition with a multi-format RFID reader.

Show

Dual Contactless Multi-format Reader

The dual contactless multi-format reader can read card or chip key and is compatible with mobile phones equipped with NFC technology.

Show

Keypad with Card Reader

Keypad with built-in card reader (EM format) for the RAMOS ACS access control system.

Show

USB Card Reader

The desktop dual card reader for PC is a handy peripheral for user card administration in the CONTEG Pro Server App.

Show

Electronic Handle

Electronic handle for mounting directly onto a rack door.

Show

Electronic Handle with Card Reader

Electronic handle with built in card reader for mounting directly onto a rack door.

Show

Hub for Electronic Handles

Hub for connecting two electronic handles on a single access control RDU unit.

Show

Electromagnetic Lock—small

Electromagnetic door lock suitable for racks that cannot be fitted with a CONTEG electronic handle.

Show

Electromagnetic Lock - large

Electromagnetic door lock (large and waterproof) suitable for mounting onto entrance doors.

Show

Access Media’s

Identification Cards and Tags for RAMOS ACS access control system.

Show

Wire Temperature sensor for Mini

1-Wire Temperature sensor comes with a 3 m long cable with an RJ12 connector.

Show

Wire Humidity sensor

1‑Wire Humidity sensor comes with a 3 m long cable with an RJ12 connector.

Show

One wire temperature and humidity sensors

Wire temperature and humidity sensors with 2 RJ12 connectors and 3 m long cable.

Show

1‑Wire Temperature OUTDOOR sensor

1-Wire temperature outdoor sensors with an RJ12 connector and 3 m long cable.

Show

PowerBox, remote switching external devices

PowerBox enables remote switching of external devices up to 230V/10A and has a power detection feature.

Show

PIR motion detector for Mini

PIR motion detector without power supply for RAMOS Mini

Show

Optical smoke detector with relay output

Optical smoke detector with relay output for RAMOS Mini

Show

Flood detector

Flood detector without power supply.

Show

Inline Meter

The 1-phase or 3-phase inline power meter with an illuminated display is designed for measuring parameters on the lead-in cable to basic PDUs and is easy to connect into existing circuits.

Show

Universal power adapter 5V DC

Universal power adapter 5 V DC for RAMOS Mini.

Show

Temperature & Humidity Sensor

The sensor reads temperature and humidity inside the IT rack. It connects via a 2.5 m cable directly to a monitored or managed PDU.

Show

Output Power Cables

Output power cables are used for transmitting electrical energy between the PDU and an IT device inside the IT rack.

Show

Input Power Cables

1-phase 16 A monitored and managed PDUs are supplied without a lead-in cable.

Show

Locking Inserts

Retention sleeves reduce the risk of accidental unplugging of the power cable.

Show

Hub for connecting of 2 sensors

Hub for connecting 2 sensors to the 1‑Wire bus.

Show

Brackets for vertical installation of PDU

For vertical installation of a power distribution unit into IT rack, it is necessary to order the appropriate bracket for basic, monitored and managed PDUs, which is not included in the package.

Show